*) added led trigger - change leds on different events;
*) snmp - restored access to routing tables;
*) snmp - fixed memory leak for OID 1.3.6.1.2.1.25.2;
*) ipsec - added ipv6 support;
*) removed broadcast setting from ip address;
*) radv - fixed problem when wrong link local address was used
to send advertisements on bridge interface;
*) ppp - make IPv6 work again (introduced in v5.0rc7);
*) ppp - fixed problem when user re-authenticated and traffic accounting
included data from previous session;
*) fixed traffic-flow on x86-smp (could stop sending flows);
*) improved usb modem mode switching;
*) kvm - fixed problem when sometimes virtualization detection fails;
*) routing - route with recursive gateway sometimes was not selected as
active, if another inferior route with directly reachable gateway
was present;
*) bgp - removed “interface” property from bgp peer configuration, now
ipv6 link local remote address must be specified using the
“address%interface” notation;
*) added extended ethernet statistics (/interface ethernet print stats) for RB800,RB1000,RB1100,and RB7xx with AR7241 or newer cpu;
*) wireless - improved 11n compatibility;
*) wireless nv2 - added support for station-bridge mode;
*) wireless nv2 - added area support;
*) wireless - added ability to set registration-table comment using RADIUS
attribute;
*) implemented usb power-reset command on RB SXT 5HnD;
Thank you guys for the LED triggers. At last I can remove all previously used and now obsolete scripts.
Let’s see now how this “wireless - improved 11n compatibility” thing works in practice. Still no short GI support, though (bad, bad, bad)!
Bug: in nv2 mode there is not traffic in station (not wds) to bridge or ap-bridge. In station wds to bridge+wds it’s ok, but i don’t need wds in my scenario. Downgrade to rc7.
Looks like IP6 is anywhere
[admin@demo2.mt.lv] > /system ssh some.internet.site.name user=root
while resolving ip6: could not get answer from dns server
[admin@demo2.mt.lv] >
