*) console - added ‘comment’ parameter for ‘/system script’
*) api - return sentences can have property “.section” that groups values
from commands such as “monitor”, “traceroute”,
“print” (with non-zero ‘interval’ value);
*) cloud - add time zone detection feature “/system clock time-zone-autodetect”;
*) cloud - rename “/ip cloud enabled” to “/ip cloud ddns-enabled”;
*) cloud - make “/ip cloud update-time” independent from “/ip cloud ddns-enabled”
*) cloud - when setting “/ip cloud ddns-enabled” to “no” router will send
message to server to disable DNS name for this routerboard;
*) cloud - “/ip cloud force-update” command now will work also when
“/ip cloud ddns-enabled = no”. usefull if user wants to disable DDNS;
*) RB4xxGL - improved ethernet throughput (less dropped packets);
*) RouterBOARD - fixed health reporting;
*) check-installation: fixed wrong kernel crc on powerpc boards
*) watchdog: fix software watchdog for x86
*) ssh - check conn state before sending disconnect message;
*) ipsec - fixed crash that happened in specific situation;
Normis,
what about Ticket#2014122166000217
(When the number of PPPoE sessions on the device becomes more 1000 - when you turn off the one PPPoE session on all other sessions observed packet loss)
RouterOS auto upgrade script is broken, there is no more “current-version” and “latest-version” properties in “/system package update”.
Also if you issue “/system package check-for-updates without-paging” output will never stop.
If you issue “/system package update check-for-updates without-paging once” the output is this:
RB (RB2011UAS-2HnD, firmware 3.19) is not able to connect to SSTP server 6.25 (RB750)
SSTP clients 6.25 (RB750, RB951-2n) are not able to connect to 6.27 SSTP server (RB2011UAS-2HnD)
in /tool profile there are CPU peaks (80%) for “ssl”, in time-period 10s the peaks are 2-3 times for around 1s (probably SSTP client attempts to connect)
after downgrade to 6.25 everything is working fine
*) api - return sentences can have property “.section” that groups values
from commands such as “monitor”, “traceroute”,
“print” (with non-zero ‘interval’ value);
I didn’t even know monitor-traffic could monitor multiple interfaces at once… Awesome! Big win for API application efficiency here .
is ether1 in the bridge?? if yes you need to move DHCP to Bridge, it doesn’t work on bridge ports.
Before (RouterOS v5 ) it was invisibly moved to master bridge interface anyways.
But “comment error” like in firewall would be nice any ways
Sounds like you have DNS/connection problems, i am upgrading all boards like that since this feature came out.
But i have also observed that check-for-update, if unsuccessful, never stops, it will try until successful…
FYI v6.25 was the problematic version for me. I even reported that to support. I was fixed in v6.26
Make sure that you have both ends of the tunnel with latest version.
I just upgraded both ends of my SSTP tunnels tp 6.27 - all is working as expected
@macgaiver:
Thank you for hint, upgrade of both ends fixed the issue
I was doing just a quick test so I have not tried this option and also I didn’t have any issues with SSTP in 6.25 .
/system health print
This works for me on RB2011, ROS6.27, latest firmware.
It is NOT bug. What do you want to see in system health?
RB951 don´t have voltage monitor and don´t have temperature monitor. http://routerboard.com/RB951G-2HnD
How does this work exactly? IP address geolocation? The accuracy of that can be hit-and-miss. If it detects the wrong timezone, I assume we just report this to support?
.
