What’s new in 6.6 (2013-Nov-07 13:04): *) winbox - fixed problem where all previous session opened windows were read only; *) certificate - no more ‘reset-certificate-cache’ and ‘decrypt’ commands, private keys can be decrypted only on ‘import’, use ‘decrypt’ before upgrade if needed; *) fixed …

can anyone else confirm that port flapping still exist? mine does :neutral_face: [ccr249.jpg]

I just upgrade from V6.3 to V6.6 Very high CPU usage. Mikrotik rb1100ahX2 Cpu was 15-20%, now goes 50-60%. I have to downgrade

Certificate export is not working. RB2011LS-IN, Windows 7 SP1 x64 running Winbox. When I press Export in the certificate details window, Winbox exits in an instant and all windows settings since its last start are lost. Also, cannot rename the certificate, it says “certificate subject is read only!…

confirmed vlan bug for us as well. From what we can tell, mainly on bridge interfaces for us. major issue for us.

I already signaled this one earlier. However if you really need to change it, you can still do it in the terminal mode. You will be able to edit the name there.

I already signaled this one earlier. However if you really need to change it, you can still do it in the terminal mode. You will be able to edit the name there. i have this issue with certifcates as well. seems winbox thinks its 365 regardless of the actual date http://forum.mikrotik.com/t/cert…

I just did some extensive testing, and could not repeat the issue. Here is what I did, please tell me how your test was different: nslookup mikrotik.com returns Address: 159.148.147.196 in my PC added a new static entry in the router, mikrotik.com address 127.0.0.1 nslookup mikrotik.com now retur…

I have the same issue, but only with “RegExp” dns entries.

i can’t repeat it right now. hmm it was bugged even in 5.26, then entry would stay until you rebooted it, it would leave the static entry page but persist in the cache. i will try to follow closer next time Hello Folks! I can confirm this as well, removed static entries remains in cache even af…

[/quote] How do you check? If you try to ping the host your static entry points to, don’t forget to flush your Windows DNS cache (‘ipconfig /flushdns’ from the elevated command prompt). When using nslookup this should not be required, since nslookup contacts the DNS server directly, thus bypassing …

RouterOS v6.6 released

RouterOS General

littlebill November 17, 2013, 1:09am 112

i have this issue with certifcates as well. seems winbox thinks its 365 regardless of the actual date

http://forum.mikrotik.com/t/certificates-365-days-only/71564/3