I am Setting up a Radio Gateway that talks between a radio system and the internet to allow cellphones to connect to a private radio system while offisite
The System Says it needs the follwoing “The following ports and their associated URL must be opened OUT/IN BOUND only”
Port 25021 TCP
Port 8833 TCP
All Customers associated URL a2o5gr8ddd3eaj.iot.us-west-2.amazonaws.com
Port 443 TCP Associated URLs:
Any entry in the *.poc01.waveoncloud.com subdomain
US Customers
us-west-2-kodiakvoice-prod-001.waveoncloud.com
Port 8089 (TCP):
Required for Splunk to update log level configuration.
All customers associated URL:
ec2-34-208-135-228.us-west-2.compute.amazonaws.com
Port 9997 (TCP):
Required for Splunk to send device logs.
All customers associated URL:
splunk-index01.waveoncloud.com
splunk-index02.waveoncloud.com
splunk-index03.waveoncloud.com
Port (Master Repeater Port) UDP – OUTBOUND)
This is the port the master repeater is using for Link Establishment and needs to be opened from the WAVE Gateway to the radio system. This is unique to each radio system.
Port 50100 UDP – INBOUND (Gateway Link Establishment Port)
This is the port that will be used by the repeaters to communicate with the WAVE Gateway and need to be opened inbound from the radio system to the WAVE Gateway.
Broadband Client Requirements
Port 443 (TCP):
Required for WAVE Mobile client (android, iOS etc.) and Web Communicators to connect to the servers from anywhere.
Port 4502 (TCP):
Required for WAVE Mobile client (android, iOS etc.) to connect to the voice servers from anywhere.
I believe I have the Ports forwarded to the proper places but dont understand what to do with the URL’s