Hi all,
I have the problem with routing. I have 2xRB with MK installed.
Configs are:
MK1:
a)IP addresses:
ether1: 192.168.0.1/24
ether2: 192.168.1.222/24 (internet)
wlan1: 192.168.100.1/24 (ap bridge to mk2+clients)
b)routes:
destination gateway
0.0.0.0/0 192.168.1.1 (gateway at ISP)
192.168.30.0/24 192.168.100.2
192.168.200.0/24 192.168.100.2
and dynamic routes made by MK itself
c)firewall:
Masquarade to outg.interf. ether2 to src.addresses 192.168.0.0/16
DNS is set to 192.168.1.1
MK2:
a)IP addresses:
ether1: 192.168.30.1/24
wlan1: 192.168.100.2/24 (station)
wlan2: 192.168.200.1/24 (ap bridge for clients)
b)routes:
destination gateway
0.0.0.0/0 192.168.100.1 (mk1)
192.168.0.0/24 192.168.100.1
and dynamic routes made by MK itself
client connected to MK2 ether1:
IP:
192.168.30.3/24
gateway: 192.168.30.1
ping request enabled.
Problem:
Internet is working on MK1 on every interface and every client connected to these interfaces.
Internet is working in mk2 console too. Internet is not working at clients connected behing every interface in MK2.
MK1 pings MK2 (its every interface IP) but it doesn’t ping ethernet (ether1) and wireless (wlan2) clients behind MK2.
When I use masquarade on MK2 then internet is working every client connected to mk2.
This is not solution, 'coz I need communicate, pinging and so on, from all network with all clients.
Where is the problem?
Thanx.
Rade
