Routing between bridged interfaces and a port

RouterOS Beginner Basics
1

Hi! Needing a little help with setting up a router.
I have a mikrotik with a bridge on ports eth1, eth2 and eth3. On eth4 I have a PC connected that I want to be able to see all subnets (there are several in 192.168.0.0/16).
I have to add an ip for each subnet? (192.168.10.0, 192.168.20.0, etc) or there is a simpler way to do it?
The router IP on eth4 is 192.168.5.3 and the PC is 192.168.5.88.

Thanks!

2

Router needs IP address for each subnet it should be routing to/from.

Read up some IP routing basics … when you do, don’t skip the part with multiple routers in same network, this is the part where fun begins.