ok i have 2 wans, im trying to have load balance between both, but also server from WAN2 the static ips from servers on the same LAN port (2)
Port 1 WAN 1
PORT 2 → giga switch → LAN (192.168.89.0/24) and static ips servers
Port 5 WAN 2 ( for the static ips)
Wan 1 - dynamic that has a wan ( from my mikrotik ) of : 192.168.2.13
Mikrotik Router IP 192.168.2.1
Wan 2 -Static 5 block ips 24.30.150.176/29 so from 177 ( gateway) to 182
Followed : http://mum.mikrotik.com/presentations/US12/steve.pdf
and used Port 1 for WAN 1 , Port 2 for LAN and Port 5 for WAN 2
i almost have it running but something is odd, sometimes it works others dont especially if it tried to run wan2 then falls back on wan1 for somereason.
my issue is i have 5 static ips that are for servers behind WAN2 and i use private lan 192.168.89.0/24 for home office,
meaning i need to srcnat 192.168.89.0 for wan1 and src nat something for wan 2
anyone did that before ?
my routes seem ok all up
sometime web pages give the connection to whatismyipaddress.com was interrupted.
i think its the srcnat that is problematic