Hi Guys
I am trying to set this up
So far I managed to do load balacing failover different networks etc
One of my main issues is this. I cannot communicate with different subnets i.e. 192.168.100.1 to 10.20.8.1
If I ping the router 10.20.8.2 it works otherwise nothing >> 10.20.8.1 is a fixed IP
Pinging 10.20.8.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 10.20.8.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
Another thing is that I cannot manage to open a port
Thanks for your help!
# apr/05/2013 11:00:06 by RouterOS 5.24
# software id = LRA4-ZVBH
#
/interface bridge
add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \
disabled=no forward-delay=15s l2mtu=1594 max-message-age=20s mtu=1500 \
name=bridge_corp priority=0x8000 protocol-mode=none transmit-hold-count=6
add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \
disabled=no forward-delay=15s l2mtu=1594 max-message-age=20s mtu=1500 \
name=bridge_guest priority=0x8000 protocol-mode=none transmit-hold-count=\
6
/interface ethernet
set 0 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1600 \
mac-address=D4:CA:6D:45:0C:68 mtu=1500 name=ether12 speed=100Mbps
set 1 arp=enabled auto-negotiation=yes comment=ether13 disabled=no \
full-duplex=yes l2mtu=1600 mac-address=D4:CA:6D:45:0C:69 mtu=1500 name=\
MGMT_PORT speed=100Mbps
set 2 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"ether01 - melita" disabled=no full-duplex=yes l2mtu=1598 mac-address=\
D4:CA:6D:45:0C:5D master-port=none mtu=1500 name=WAN01 speed=100Mbps
set 3 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"ether02 - GO" disabled=no full-duplex=yes l2mtu=1598 mac-address=\
D4:CA:6D:45:0C:5E master-port=none mtu=1500 name=WAN02 speed=100Mbps
set 4 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
"ether03 - sky" disabled=no full-duplex=yes l2mtu=1598 mac-address=\
D4:CA:6D:45:0C:5F master-port=none mtu=1500 name=WAN03 speed=100Mbps
set 5 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
ether04 disabled=no full-duplex=yes l2mtu=1598 mac-address=\
D4:CA:6D:45:0C:60 master-port=none mtu=1500 name=WAN04 speed=100Mbps
set 6 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1598 mac-address=D4:CA:6D:45:0C:61 \
master-port=none mtu=1500 name=ether5 speed=100Mbps
set 7 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
ether06 disabled=no full-duplex=yes l2mtu=1598 mac-address=\
D4:CA:6D:45:0C:62 master-port=none mtu=1500 name=INTERNALLAN speed=\
100Mbps
set 8 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
ether07 disabled=no full-duplex=yes l2mtu=1598 mac-address=\
D4:CA:6D:45:0C:63 master-port=none mtu=1500 name=WIFIWAN speed=100Mbps
set 9 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited comment=\
ether08 disabled=no full-duplex=yes l2mtu=1598 mac-address=\
D4:CA:6D:45:0C:64 master-port=none mtu=1500 name=WIFILAN speed=100Mbps
set 10 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1598 mac-address=D4:CA:6D:45:0C:65 \
master-port=none mtu=1500 name=ether9 speed=100Mbps
set 11 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1598 mac-address=D4:CA:6D:45:0C:66 \
master-port=none mtu=1500 name=ether10 speed=100Mbps
set 12 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=\
1600 mac-address=D4:CA:6D:45:0C:67 mtu=1500 name=ether11 speed=100Mbps
/interface vlan
add arp=enabled disabled=no interface=ether10 l2mtu=1594 mtu=1500 name=\
guest_vlan10 use-service-tag=no vlan-id=10
add arp=enabled disabled=no interface=ether10 l2mtu=1594 mtu=1500 name=\
corp_vlan20 use-service-tag=no vlan-id=20
add arp=enabled disabled=no interface=ether10 l2mtu=1594 mtu=1500 name=\
wifi_lobby_vlan30 use-service-tag=no vlan-id=30
/interface ethernet switch
set 0 mirror-source=none mirror-target=none name=switch2
set 1 mirror-source=none mirror-target=none name=switch1
/ip hotspot profile
set [ find default=yes ] dns-name="" hotspot-address=0.0.0.0 html-directory=\
hotspot http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=\
cookie,http-chap name=default rate-limit="" smtp-server=0.0.0.0 \
split-user-domain=no use-radius=no
/ip hotspot user profile
set [ find default=yes ] idle-timeout=none keepalive-timeout=2m name=default \
rate-limit=128k/128k shared-users=1 status-autorefresh=1m \
transparent-proxy=no
/ip hotspot profile
add dns-name="" hotspot-address=192.168.50.1 html-directory=hotspot \
http-proxy=0.0.0.0:0 login-by=http-chap,trial name=hsprof1 rate-limit="" \
smtp-server=0.0.0.0 split-user-domain=no trial-uptime=1h/1d \
trial-user-profile=default use-radius=no
/ip ipsec proposal
set [ find default=yes ] auth-algorithms=sha1 disabled=no enc-algorithms=3des \
lifetime=30m name=default pfs-group=modp1024
/ip pool
add name=INTERNALLAN_POOL ranges=10.37.1.3-10.37.1.254
add name=dhcp_pool1 ranges=10.20.8.3-10.20.8.254
add name=hs-pool-18 ranges=192.168.50.2-192.168.50.254
add name=dhcp_pool2 ranges=5.5.5.254
add name=MGNT_pool ranges=192.168.100.200-192.168.200.254
add name=dhcp_pool3 ranges=192.168.100.250-192.168.100.254
/ip dhcp-server
add address-pool=INTERNALLAN_POOL authoritative=after-2sec-delay \
bootp-support=static disabled=no interface=bridge_corp lease-time=3d \
name=dhcp1
add address-pool=dhcp_pool1 authoritative=after-2sec-delay bootp-support=\
static disabled=no interface=bridge_guest lease-time=3d name=dhcp2
add address-pool=hs-pool-18 authoritative=after-2sec-delay bootp-support=\
static disabled=no interface=wifi_lobby_vlan30 lease-time=1h name=dhcp3
add address-pool=dhcp_pool2 authoritative=after-2sec-delay bootp-support=\
static disabled=no interface=WIFIWAN lease-time=2d name=dhcp4
add address-pool=dhcp_pool3 authoritative=after-2sec-delay bootp-support=\
static disabled=no interface=MGMT_PORT lease-time=3d name=dhcp5
/ip hotspot
add address-pool=hs-pool-18 addresses-per-mac=2 disabled=no idle-timeout=5m \
interface=wifi_lobby_vlan30 keepalive-timeout=none name=hotspot1 profile=\
hsprof1
/port
set 0 baud-rate=115200 data-bits=8 flow-control=none name=serial0 parity=none \
stop-bits=1
set 1 baud-rate=115200 data-bits=8 flow-control=none name=serial1 parity=none \
stop-bits=1
/ppp profile
set 0 change-tcp-mss=yes name=default only-one=default use-compression=\
default use-encryption=default use-mpls=default use-vj-compression=\
default
set 1 change-tcp-mss=yes name=default-encryption only-one=default \
use-compression=default use-encryption=yes use-mpls=default \
use-vj-compression=default
/queue type
set 0 kind=pfifo name=default pfifo-limit=50
set 1 kind=pfifo name=ethernet-default pfifo-limit=50
set 2 kind=sfq name=wireless-default sfq-allot=1514 sfq-perturb=5
set 3 kind=red name=synchronous-default red-avg-packet=1000 red-burst=20 \
red-limit=60 red-max-threshold=50 red-min-threshold=10
set 4 kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=5
set 5 kind=none name=only-hardware-queue
set 6 kind=mq-pfifo mq-pfifo-limit=50 name=multi-queue-ethernet-default
set 7 kind=pfifo name=default-small pfifo-limit=10
/routing bgp instance
set default as=65530 client-to-client-reflection=yes disabled=no \
ignore-as-path-len=no name=default out-filter="" redistribute-connected=\
no redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \
redistribute-static=no router-id=0.0.0.0 routing-table=""
/routing ospf instance
set [ find default=yes ] disabled=no distribute-default=never in-filter=\
ospf-in metric-bgp=auto metric-connected=20 metric-default=1 \
metric-other-ospf=auto metric-rip=20 metric-static=20 name=default \
out-filter=ospf-out redistribute-bgp=no redistribute-connected=no \
redistribute-other-ospf=no redistribute-rip=no redistribute-static=no \
router-id=0.0.0.0
/routing ospf area
set [ find default=yes ] area-id=0.0.0.0 disabled=no instance=default name=\
backbone type=default
/snmp community
set [ find default=yes ] addresses="" authentication-password="" \
authentication-protocol=MD5 encryption-password="" encryption-protocol=\
DES name=public read-access=yes security=none write-access=no
/system logging action
set 0 memory-lines=100 memory-stop-on-full=no name=memory target=memory
set 1 disk-file-count=2 disk-file-name=log disk-lines-per-file=100 \
disk-stop-on-full=no name=disk target=disk
set 2 name=echo remember=yes target=echo
set 3 bsd-syslog=no name=remote remote-port=514 src-address=0.0.0.0 \
syslog-facility=daemon syslog-severity=auto target=remote
/user group
set read name=read policy="local,telnet,ssh,reboot,read,test,winbox,password,w\
eb,sniff,sensitive,api,!ftp,!write,!policy" skin=default
set write name=write policy="local,telnet,ssh,reboot,read,write,test,winbox,pa\
ssword,web,sniff,sensitive,api,!ftp,!policy" skin=default
set full name=full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,\
winbox,password,web,sniff,sensitive,api" skin=default
/interface bridge port
add bridge=bridge_corp disabled=no edge=auto external-fdb=auto horizon=none \
interface=corp_vlan20 path-cost=10 point-to-point=auto priority=0x80
add bridge=bridge_corp disabled=no edge=auto external-fdb=auto horizon=none \
interface=INTERNALLAN path-cost=10 point-to-point=auto priority=0x80
add bridge=bridge_guest disabled=no edge=auto external-fdb=auto horizon=none \
interface=WIFILAN path-cost=10 point-to-point=auto priority=0x80
add bridge=bridge_guest disabled=no edge=auto external-fdb=auto horizon=none \
interface=guest_vlan10 path-cost=10 point-to-point=auto priority=0x80
/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=\
no
/interface ethernet switch port
set 0 vlan-header=leave-as-is vlan-mode=disabled
set 1 vlan-header=leave-as-is vlan-mode=disabled
set 2 vlan-header=leave-as-is vlan-mode=disabled
set 3 vlan-header=leave-as-is vlan-mode=disabled
set 4 vlan-header=leave-as-is vlan-mode=disabled
set 5 vlan-header=leave-as-is vlan-mode=disabled
set 6 vlan-header=leave-as-is vlan-mode=disabled
set 7 vlan-header=leave-as-is vlan-mode=disabled
set 8 vlan-header=leave-as-is vlan-mode=disabled
set 9 vlan-header=leave-as-is vlan-mode=disabled
set 10 vlan-header=leave-as-is vlan-mode=disabled
set 11 vlan-header=leave-as-is vlan-mode=disabled
/interface l2tp-server server
set authentication=pap,chap,mschap1,mschap2 default-profile=\
default-encryption enabled=no keepalive-timeout=30 max-mru=1460 max-mtu=\
1460 mrru=disabled
/interface ovpn-server server
set auth=sha1,md5 certificate=none cipher=blowfish128,aes128 default-profile=\
default enabled=no keepalive-timeout=60 mac-address=FE:1C:23:8B:35:65 \
max-mtu=1500 mode=ip netmask=24 port=1194 require-client-certificate=no
/interface pptp-server server
set authentication=mschap1,mschap2 default-profile=default-encryption \
enabled=no keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled
/interface sstp-server server
set authentication=pap,chap,mschap1,mschap2 certificate=none default-profile=\
default enabled=no keepalive-timeout=60 max-mru=1500 max-mtu=1500 mrru=\
disabled port=443 verify-client-certificate=no
/ip accounting
set account-local-traffic=no enabled=no threshold=256
/ip accounting web-access
set accessible-via-web=no address=0.0.0.0/0
/ip address
add address=192.168.100.1/24 disabled=no interface=MGMT_PORT network=\
192.168.100.0
add address=60.0.00.10/28 disabled=no interface=WAN03 network=60.0.00.10.96
add address=10.37.1.2/24 disabled=no interface=bridge_corp network=10.37.1.0
add address=10.20.8.2/24 disabled=no interface=bridge_guest network=10.20.8.0
add address=192.168.50.1/24 disabled=no interface=wifi_lobby_vlan30 network=\
192.168.50.0
add address=5.5.5.1/24 disabled=no interface=WIFIWAN network=5.5.5.0
/ip arp
add address=10.20.8.1 disabled=no interface=bridge_guest mac-address=\
00:0C:29:B1:F2:B3
/ip dhcp-client
add add-default-route=no disabled=no interface=WAN01 use-peer-dns=no \
use-peer-ntp=no
/ip dhcp-server config
set store-leases-disk=5m
/ip dhcp-server lease
add address=10.20.8.1 client-id=1:0:c:29:b1:f2:b3 disabled=no mac-address=\
00:0C:29:B1:F2:B3 server=dhcp2
/ip dhcp-server network
add address=5.5.5.0/24 dhcp-option="" dns-server=5.5.5.1 gateway=5.5.5.1 \
ntp-server="" wins-server=""
add address=10.20.8.0/24 dhcp-option="" dns-server=10.20.8.1 gateway=\
10.20.8.1 ntp-server="" wins-server=""
add address=10.37.1.0/24 dhcp-option="" dns-server="" gateway=10.37.1.2 \
ntp-server="" wins-server=""
add address=192.168.50.0/24 comment="hotspot network" dhcp-option="" \
dns-server="" gateway=192.168.50.1 ntp-server="" wins-server=""
add address=192.168.100.0/24 dhcp-option="" dns-server="" gateway=\
192.168.100.1 ntp-server="" wins-server=""
/ip dns
set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB \
max-udp-packet-size=4096 servers=8.8.8.8
/ip firewall connection tracking
set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \
tcp-close-wait-timeout=10s tcp-established-timeout=1d \
tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \
tcp-syn-received-timeout=5s tcp-syn-sent-timeout=5s tcp-syncookie=no \
tcp-time-wait-timeout=10s udp-stream-timeout=3m udp-timeout=10s
/ip firewall filter
add action=passthrough chain=unused-hs-chain comment=\
"place hotspot rules here" disabled=yes
add action=drop chain=forward disabled=yes dst-address=10.20.8.0/24 \
src-address=10.37.1.0/24
add action=accept chain=input comment="Allow Winbox Access from Outside" \
disabled=no dst-port=8291 in-interface=WAN01 protocol=tcp
add action=accept chain=input comment="Allow Winbox Access from Outside" \
disabled=no dst-port=8291 in-interface=WAN03 protocol=tcp
add action=accept chain=input comment="Allow Winbox Access from Outside" \
disabled=no dst-port=8291 in-interface=WAN02 protocol=tcp
add action=accept chain=input comment="Allow Winbox Access from Outside" \
disabled=no dst-port=8291 in-interface=WAN04 protocol=tcp
add action=accept chain=input comment="Allow Established connections" \
connection-state=established disabled=no in-interface=WAN01
add action=accept chain=input comment="Allow Established connections" \
connection-state=established disabled=no in-interface=WAN02
add action=accept chain=input comment="Allow Established connections" \
connection-state=established disabled=no in-interface=WAN03
add action=accept chain=input comment="Allow Established connections" \
connection-state=established disabled=no in-interface=WAN04
add action=accept chain=input comment="Allow Related connections" \
connection-state=established disabled=no in-interface=WAN01
add action=accept chain=input comment="Allow Related connections" \
connection-state=established disabled=no in-interface=WAN02
add action=accept chain=input comment="Allow Related connections" \
connection-state=established disabled=no in-interface=WAN03
add action=accept chain=input comment="Allow Related connections" \
connection-state=established disabled=no in-interface=WAN04
add action=drop chain=input comment="Drop anything else" disabled=no \
in-interface=WAN01
add action=drop chain=input comment="Drop anything else" disabled=no \
in-interface=WAN02
add action=drop chain=input comment="Drop anything else" disabled=no \
in-interface=WAN03
add action=drop chain=input comment="Drop anything else" disabled=no \
in-interface=WAN04
/ip firewall mangle
add action=accept chain=prerouting disabled=no dst-address=192.168.0.0/24 \
in-interface=INTERNALLAN
add action=accept chain=prerouting disabled=no dst-address=60.0.00.10/28 \
in-interface=INTERNALLAN
add action=accept chain=prerouting disabled=no dst-address=195.158.111.42 \
in-interface=INTERNALLAN
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no in-interface=WAN01 new-connection-mark=WAN01_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no in-interface=WAN03 new-connection-mark=WAN03_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no in-interface=WAN02 new-connection-mark=WAN02_conn passthrough=yes
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no dst-address-type=!local in-interface=INTERNALLAN new-connection-mark=\
WAN01_conn passthrough=yes per-connection-classifier=both-addresses:3/0
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no dst-address-type=!local in-interface=INTERNALLAN new-connection-mark=\
WAN03_conn passthrough=yes per-connection-classifier=both-addresses:3/1
add action=mark-connection chain=prerouting connection-mark=no-mark disabled=\
no dst-address-type=!local in-interface=INTERNALLAN new-connection-mark=\
WAN02_conn passthrough=yes per-connection-classifier=both-addresses:3/2
add action=mark-routing chain=prerouting connection-mark=WAN01_conn disabled=\
no in-interface=INTERNALLAN new-routing-mark=to_WAN01 passthrough=yes
add action=mark-routing chain=prerouting connection-mark=WAN03_conn disabled=\
no in-interface=INTERNALLAN new-routing-mark=to_WAN03 passthrough=yes
add action=mark-routing chain=prerouting connection-mark=WAN02_conn disabled=\
no in-interface=INTERNALLAN new-routing-mark=to_WAN02 passthrough=yes
add action=mark-routing chain=output connection-mark=WAN01_conn disabled=no \
new-routing-mark=to_WAN01 passthrough=yes
add action=mark-routing chain=output connection-mark=WAN03_conn disabled=no \
new-routing-mark=to_WAN03 passthrough=yes
add action=mark-routing chain=output connection-mark=WAN02_conn disabled=no \
new-routing-mark=to_WAN02 passthrough=yes
add action=accept chain=prerouting disabled=no dst-address=10.20.8.0/24 \
src-address=192.168.100.0/24
/ip firewall nat
add action=passthrough chain=unused-hs-chain comment=\
"place hotspot rules here" disabled=yes to-addresses=0.0.0.0
add action=masquerade chain=srcnat disabled=no out-interface=WAN01
add action=masquerade chain=srcnat disabled=no out-interface=WAN03
add action=masquerade chain=srcnat disabled=no out-interface=WAN02
add action=accept chain=srcnat disabled=yes dst-address=10.20.8.0/24 \
src-address=192.168.100.0/24
add action=masquerade chain=srcnat comment="masquerade hotspot network" \
disabled=no src-address=192.168.50.0/24 to-addresses=0.0.0.0
add action=dst-nat chain=dstnat disabled=no dst-address=60.0.00.10 \
dst-port=12010 protocol=tcp src-address=0.0.0.0/0 to-addresses=10.20.8.1 \
to-ports=12010
add action=dst-nat chain=dstnat disabled=no dst-address=92.251.93.16 \
dst-port=12010 protocol=tcp src-address=0.0.0.0/0 to-addresses=5.5.5.254 \
to-ports=12010
/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no ports=5060,5061 sip-direct-media=yes
set pptp disabled=no
/ip hotspot service-port
set ftp disabled=no ports=21
/ip hotspot user
add disabled=no name=admin password="(pass123)" profile=default
/ip hotspot walled-garden
add action=allow disabled=no dst-host=*.goldentulipvivaldi.com dst-port=""
/ip neighbor discovery
set ether12 disabled=no
set MGMT_PORT disabled=no
set WAN01 disabled=no
set WAN02 disabled=no
set WAN03 disabled=no
set WAN04 disabled=no
set ether5 disabled=no
set INTERNALLAN disabled=no
set WIFIWAN disabled=no
set WIFILAN disabled=no
set ether9 disabled=no
set ether10 disabled=no
set ether11 disabled=no
set guest_vlan10 disabled=yes
set corp_vlan20 disabled=yes
set bridge_corp disabled=no
set bridge_guest disabled=no
set wifi_lobby_vlan30 disabled=yes
/ip proxy
set always-from-cache=no cache-administrator=webmaster cache-hit-dscp=4 \
cache-on-disk=no enabled=no max-cache-size=none max-client-connections=\
600 max-fresh-time=3d max-server-connections=600 parent-proxy=0.0.0.0 \
parent-proxy-port=0 port=8080 serialize-connections=no src-address=\
0.0.0.0
/ip route
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
192.168.0.1 routing-mark=to_WAN01 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
60.0.00.10 routing-mark=to_WAN03 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
10.0.0.1 routing-mark=to_WAN02 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
60.0.00.10 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=2 dst-address=0.0.0.0/0 gateway=\
192.168.0.1 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=3 dst-address=0.0.0.0/0 gateway=\
10.0.0.1 scope=30 target-scope=10
add disabled=no distance=1 dst-address=10.20.8.0/24 gateway=MGMT_PORT \
pref-src=192.168.100.1 scope=30 target-scope=10
/ip service
set telnet address="" disabled=no port=23
set ftp address="" disabled=no port=21
set www address="" disabled=no port=80
set ssh address="" disabled=no port=22
set www-ssl address="" certificate=none disabled=yes port=443
set api address="" disabled=yes port=8728
set winbox address="" disabled=no port=8291
/ip smb
set allow-guests=yes comment=MikrotikSMB domain=MSHOME enabled=no interfaces=\
all
/ip smb shares
set [ find default=yes ] comment="default share" directory=/pub disabled=no \
max-sessions=10 name=pub
/ip smb users
set [ find default=yes ] disabled=no name=guest password="" read-only=yes
/ip socks
set connection-idle-timeout=2m enabled=no max-connections=200 port=1080
/ip traffic-flow
set active-flow-timeout=30m cache-entries=4k enabled=no \
inactive-flow-timeout=15s interfaces=all
/ip upnp
set allow-disable-external-interface=yes enabled=no show-dummy-rule=yes
/mpls
set dynamic-label-range=16-1048575 propagate-ttl=yes
/mpls interface
set [ find default=yes ] disabled=no interface=all mpls-mtu=1508
/mpls ldp
set distribute-for-default-route=no enabled=no hop-limit=255 loop-detect=no \
lsr-id=0.0.0.0 path-vector-limit=255 transport-address=0.0.0.0 \
use-explicit-null=no
/port firmware
set directory=firmware ignore-directip-modem=no
/ppp aaa
set accounting=yes interim-update=0s use-radius=no
/queue interface
set ether12 queue=only-hardware-queue
set MGMT_PORT queue=only-hardware-queue
set WAN01 queue=only-hardware-queue
set WAN02 queue=only-hardware-queue
set WAN03 queue=only-hardware-queue
set WAN04 queue=only-hardware-queue
set ether5 queue=only-hardware-queue
set INTERNALLAN queue=only-hardware-queue
set WIFIWAN queue=only-hardware-queue
set WIFILAN queue=only-hardware-queue
set ether9 queue=only-hardware-queue
set ether10 queue=only-hardware-queue
set ether11 queue=only-hardware-queue
/radius incoming
set accept=no port=3799
/routing bfd interface
set [ find default=yes ] disabled=no interface=all interval=0.2s min-rx=0.2s \
multiplier=5
/routing mme
set bidirectional-timeout=2 gateway-class=none gateway-keepalive=1m \
gateway-selection=no-gateway origination-interval=5s preferred-gateway=\
0.0.0.0 timeout=1m ttl=50
/routing rip
set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 \
metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \
redistribute-connected=no redistribute-ospf=no redistribute-static=no \
routing-table=main timeout-timer=3m update-timer=30s
/snmp
set contact="" enabled=no engine-id="" location="" trap-generators="" \
trap-target="" trap-version=1
/system clock
set time-zone-name=Europe/Malta
/system clock manual
set dst-delta=+00:00 dst-end="jan/01/1970 00:00:00" dst-start=\
"jan/01/1970 00:00:00" time-zone=+00:00
/system console
set [ find port=serial0 ] channel=0 disabled=no port=serial0 term=vt102
/system health
set fan-mode=auto use-fan=main
/system identity
set name=MikroTik
/system logging
set 0 action=memory disabled=no prefix="" topics=info
set 1 action=memory disabled=no prefix="" topics=error
set 2 action=memory disabled=no prefix="" topics=warning
set 3 action=echo disabled=no prefix="" topics=critical
/system note
set note="" show-at-login=yes
/system ntp client
set enabled=yes mode=unicast primary-ntp=131.188.3.222 secondary-ntp=\
131.188.3.223
/system resource irq
set 0 cpu=auto
set 1 cpu=auto
set 2 cpu=auto
set 3 cpu=auto
set 4 cpu=auto
set 5 cpu=auto
set 6 cpu=auto
set 7 cpu=auto
set 8 cpu=auto
set 9 cpu=auto
set 10 cpu=auto
set 11 cpu=auto
set 12 cpu=auto
set 13 cpu=auto
set 14 cpu=auto
/system resource irq rps
set ether12 disabled=no
set MGMT_PORT disabled=no
set WAN01 disabled=yes
set WAN02 disabled=yes
set WAN03 disabled=yes
set WAN04 disabled=yes
set ether5 disabled=yes
set INTERNALLAN disabled=yes
set WIFIWAN disabled=yes
set WIFILAN disabled=yes
set ether9 disabled=yes
set ether10 disabled=yes
set ether11 disabled=yes
/system routerboard settings
set baud-rate=115200 boot-delay=2s boot-device=nand-if-fail-then-ethernet \
boot-protocol=bootp cpu-frequency=1066MHz enable-jumper-reset=yes \
enter-setup-on=any-key force-backup-booter=no silent-boot=no
#error
/system upgrade mirror
set check-interval=1d enabled=no primary-server=0.0.0.0 secondary-server=\
0.0.0.0 user=""
/system watchdog
set auto-send-supout=no automatic-supout=yes no-ping-delay=5m watch-address=\
none watchdog-timer=yes
/tool bandwidth-server
set allocate-udp-ports-from=2000 authenticate=yes enabled=yes max-sessions=\
100
/tool e-mail
set address=0.0.0.0 from=<> password="" port=25 starttls=no user=""
/tool graphing
set page-refresh=300 store-every=5min
/tool graphing interface
add allow-address=0.0.0.0/0 disabled=no interface=all store-on-disk=yes
/tool mac-server
set [ find default=yes ] disabled=no interface=all
/tool mac-server mac-winbox
set [ find default=yes ] disabled=no interface=all
/tool mac-server ping
set enabled=yes
/tool sms
set allowed-number="" channel=0 keep-max-sms=0 receive-enabled=no secret=""
/tool sniffer
set file-limit=1000KiB file-name="" filter-ip-address="" filter-ip-protocol=\
"" filter-mac-address="" filter-mac-protocol="" filter-port="" \
filter-stream=yes interface=all memory-limit=100KiB memory-scroll=yes \
only-headers=no streaming-enabled=no streaming-server=0.0.0.0
/tool traffic-generator
set latency-distribution-scale=10 test-id=0
/user aaa
set accounting=yes default-group=read exclude-groups="" interim-update=0s \
use-radius=no