Routing problem

RouterOS General
1

Hi,
have problem with routing
i change site from bridge and WDS to routing network, after change network works (http,pop3,smtp,dns,…) but
UDP packet don’t work :frowning:.

here is my network http://www.zzspak.cz/schema.png

I test bandwith test from 192.168.241.1 (MT1) → 192.168.241.2 (MT3) (work), but test 192.168.241.1 (MT1) → 10.100.3.1 (MT3) (don’t work)

Thx for help

2

so you can ping that address, and connect to that address from your MT1 on that address?

if your routing is ok you should not have any problems with udp

3

ping to all MT work
from MT1 ping to MT3, MT10,… work and from MT3 to MT1,MT10,… work

bandwith test UDP from any MT to any 192.168.xxx.xxx work (testing from winbox)
bandwith test UDP from any MT to any 10.100.xxx.1 don’t work (testing from winbox)
bandwith test TCP from any MT to any 192.168.xxx.xxx work (testing from winbox)
bandwith test TCP from any MT to any 10.100.xxx.1 work (testing from winbox)

bandwith test UDP from any PC to any 192.168.xxx.xxx work (testing from windows)
bandwith test UDP from any PC to any 10.100.xxx.1 don’t work (testing from windows)
bandwith test TCP from any PC to any 192.168.xxx.xxx work (testing from windows)
bandwith test TCP from any PC to any 10.100.xxx.1 work (testing from windows)


here is configuration MT3 and MT4
http://www.zzspak.cz/MT3.txt
http://www.zzspak.cz/MT4.txt

all is OSPF + static route (if OSPF drop) - OSPF work in all MT, but i have problem in MT10 - OSPF in MT10 don’t work :frowning:

sorry for my bad english