Routing problems

RouterOS General
1

So i have made a setup earlier and i have a problem i can’t seem to figure out. I think it just need some route rules though. I have 3 different bridges:
1)bridge: contains 1 physical interface (ether5) and 1 logical (l2tp_1) and is configured with 1 network (192.168.10.1/24) (belongs to LAN_1 interface list)
2)def_bridge: contains 2 physical interfaces (ether2, ether3) and 1 logical (l2tp_2) and is configured with 1 network (192.168.11.1/24) (belongs to LAN_2 interface list)
3)wifi_bridge: contains 1 interface (wifi) and is configured with 1 network (192.168.1.1/24) (belongs to LAN_3 interface list)
**ether1 interface (WAN) belongs to WAN interface list along with 1 pppoe-out interface
PROBLEM IS:

  1. 192.168.10.10 (in l2tp_1) doesn’t ping the 192.168.11.100 (in ether3) but pings 192.168.11.101 (in ether2)
  2. 192.168.10.100 (in ether5) doesn’t ping the 192.168.11.100 (in ether3) but pings 192.168.11.101 (in ether2)
  3. 192.168.11.11 (in l2tp_2) doesn’t ping anything
    Although all devices of the 3 networks have internet.
2

I hardly use L2TP any more. IPSec + IKEv2 is much saver and more stable.
Also it’s allways a good idea to use a different subnet for VPN.

Maybe there’s something blocking your packets in your firewall forward rules, could you please post your configuration?

3

Hello,

the correct Gatway is registered at the client 192.168.11.100 and there is no active firewall on the client which could block the ping?

In the first moment I would say in all cases if one client goes and the other does not then it is the client.

Greetings