I have a network and the diagramme is attached here. How can the laptop (Support) reach RB951 router (NAT) from the design.
Kind of impossible to help you without at the VERY least, IP addresses and subnet masks…
Please learn how to ask intelligent questions 
have posted the new design with ip address please recheck.
Why did you make this design and why don’t you fix it?
Thanks all for the responses. For Clarity purposes. This is a forum were people can freely make comment and discuss to get better with their solutions.
I design this network for a purpose. The AP(192.168.0.1) is a point to multi point Link which about 50 clients are connected to it as such I made it DHCP server. The client on STX (out door radio) gets an ip 192.168.0.112 on the wlan interface and i configured a nat for his internal network with the IP address 192.168.10.1. Now there’s an RB951 router he just purchase and he’s requesting that configure Hotspot and some firewall rules to help him do some traffic and billing services in their organization so as such it will require me to support them on that service. That’s Why i want to get the best, appropraite and professional solution to deploy. Thanks.
Sure you designed it for a reason, but that does not mean you have to make such a silly design.
I advise you to make a good network plan where all networks and devices have unique addresses and NAT is not required.
Pe1chl. The reason presented this in the forum is to share idea. Please make your contributions or recommendations if you have any. I never wanted all the clients Internal Ip addresses to come to my Router router. Also I never plan to manage clients LAN from my earlier design. The senario now is just a new development and i want to implement that only to some client that will request such. what’s your design?