RS232 signal across a wireless link

RouterOS General
1

Hello,

I need to make a project to pass a RS232 signal of one “relé” (I don’t know this in .uk…perhaps relay..) between 2 buildings. This Relé has 2 states.. open or close and i need to put this open/close signal in the remote building of the link. Can I connect it directly to rs232 of a third routerboard?

I’ll put a link and I can put more routerboards if I need it.


anyone can help me¿?
Thanks

2

No you’ll need a serial over IP solution.

http://www.perle.com/products/Terminal-Server.shtml

3

Can you explain how is the comunication with this?

If I get an open signal in A-side, it sends X through the wireless link and later in B-Side i get the open signal in the conversor?

How is the configuration of this conversors? I mean.. have IPs, routes?

Thanks,

4

Name name say it all :slight_smile: Serial Over IP mean it have one IP and route on it and there are different types of how much RS232 ports are on it.

5

Hola Martin,

Lograste éxito en este proyecto haciéndolo con Mikrotik?

Agradezco comentarios, saludos.

6

Ya no me acuerdo que proyecto era ; ))))))

We used rs232 conversor to pass sensor signals, but not to open a “relé”

7

If it RS232 there is no difference.
RS232 is standardized.

8

thanks for your quick response. regards.

9

Hello onnoossendrijver.
thanks for your quick response.
the idea is to use the RS232 port the Mikrotik, not use RS232/IP gateway add to Mikrotik.
the premise is founded, have one equip that do all=> Wireless RS232 converter and inversely.
It is possible with Mikrotik?
​​​continue to dialogue, thanks, regards.

10

Ah… Ok.. I misunderstood.
I believe this feature was recently added to a beta release and removed one release later because it’s was not stable.
So I don’t think it’s possible unfortunately.