server & printers behind router & VPN

RouterOS Beginner Basics
1

hi,

i am using VPN which is already on mikrotik…PPTP which work perfect…router have static WAN IP from provider…

VPN client which is come conected get local ip over VPN 192.168.0.20-22

but i cannot acess back in local network…example server have adress 192.168.0.110 & printer 192.168.0.111…

what i need to do to have this acees over VPN…

2

Either enabling “use default gateway on remote network” or adding a route to 192.168.0.0/24 through the PPTP.

3

In addition to Pukkita’s suggestions, be sure to go into your lan interface’s settings and set arp type=proxy arp.

4

thanks for help…but do i need to put this on mikrotik side or client? :wink:

5

u mean ether3-4 = slave or even ether 1 = gw & ether 2 = master?

6

Whichever interface has the LAN IP address configured on it.

And as for this:

It’s on the client side.

7

http://l2tp.patokatech.com/
These are winbox screen prints of my L2TP VPN setup, I think PPTP should be similar.

8

thanks for help…was just change type=proxy arp…and everything start working…