Hello all,
I’ve been trying to setup my Groove A 52 AC as a Wireless access point.
(I tried this connecting the groove to an Hap Lite and my own computer as well)
The HaP Lite is configured as an hotspot that has access to the internet.
From my computer,
I try to add a dchp server with the Following parameters
DCHP server interface wlan1
DCHP Address space 192.168.88.0/24
Gateway for DHCP Network 192.168.88.1
DHCP Relay 192.168.88.1
Addresses to Give Out 192.168.88.2-192.168.88.254
8.8.8.8
But the DHCP Server resulting is Always greyed out and marked as Invalid
I tried this again by setting the wlan1 as AP bridge and setting a password but the DCHP Server config doesn’t work, so that when I connect wirelessly to GrooveA, I get Ping Failure.
I tried adding a bridge as well and setting up the DHCP server on that bridge but it’s still greyed out and marked as invalid.
Also tried adding ip address for the wlan1 and setting up DHCP server, but still grey.
I reseted my GrooveA, can someone please give me the steps to follow ?