We being running for 8 months with rb500 4 120degrees and 4 1w amps
alls going well our customers are using tplink cards
now i am trying to use a rb500 at home to test as to use it instead of the cards for the cutomers i can ping the home unit from our tower and ping from
home to tower
i can ping the home unit from my computer and again from the unit to my
computer
even i can log into the rb500 home unit from work using our tower
but cant access from my computer to tower or internet
settings that i tried
/interface enable wlan2 ether1
/ip address add address=10.0.0.217/24 interface=wlan2
/ip address add address=192.168.124/24 interface=ether1
/ip route add gateway=10.0.0.1
/ip firewall nat chain=srcnat action=masquerade out-interface=wlan2
/inerface wireless set wlan2 ssid=squid band=2.4b/g mode=station disabled=no
i did not add a bridge as cards cant be bridge in station mode
the towers is running ab bridge mode and i did use the same channel and ssid we just using a wep key and not all the other sttings yet buzy teaching our self as we go along already have 30 customers on line and running from a internet cafe so far so good
any help would be great
thanks sidney