Setting up PPTP without using Proxy-Arp (or filtering it)

RouterOS General
1

I setup my Routerboard 750 as a PPTP server. I can’t ping anything from my client machine on the LAN side of the router, unless Proxy-ARP is enabled. However, when Proxy-ARP is enabled, it eventually kills our other subnets as it’s answering ARP requests for everything. Sooo…

-Can I setup some NAT rules so I don’t have to use Proxy-ARP

or

-Can I setup a filter for Proxy-ARP so it only answers ARP requests on a specific subnet?

Info:
Router’s LAN is at 10.0.0.2
VPN Pool is 192.168.254.x
Router’s VPN side is 192.168.254.1

Thanks!

2

Use a different IP range/pool from the LAN side of your router. Also make sure each end of the tunnel is on different subnets and you have the correct routes in the routers.

3

What routes need to be specified?