Apologies in advance - home user using Mikrotik out of necessity and trying to learn as I go. Using a 951G Routerboard with LAN on ether2 via a “homeplug”
Bonded ADSL as per here: http://wiki.aa.org.uk/Router_-_RouterOS_and_Routerboard_bonding
LAN devices work ok with address 192.168.1.100 for LAN interface and I have PPPoE clients via ether 1 and ether 3.
Set up DHCP server on LAN interface as gateway and it gives out IP addresses 192.168.1.0/24.
I enable wifi as home AP and give it an IP address 192.168.1.1 but I have tried to get it to work as an AP however it breaks the rest of the LAN.
In Quick Set screen if I apply NAT and DHCP server it will give out IP addresses and allow connections via wifi but the LAN devices connecting via ethernet won’t access the internet. If I apply “Bridge all LAN ports” my PPPoE on ether3 is lost.
Anyone able to point me in the right direction or advise thanks.
