Setup wireguard

Sample Network Diagram Template.png
can someone please help me with: I have 4 offices with 4 different networks no static IPs

  • router 1: main office
  • router 2: have nordvpn configured in the router
  • router 3: have nordvpn configured in the router
  • router 4: have nordvpn configured in the router
    I want to setup wireguard VPN tunel (site to site) so I can manage and reach (router 2-3-4) from router 1
    (managing the router and the PCs), I have file server in the office 1 which is connected to the router 1 and should be reachable to all other PCs in the other offices.

Which Router(s) have a reachable public IP address, or can forward ports from upstream router.
Dont really care about NORDVPN, has nothing to do with what your asking.

I can get it by checking on (what is my IP) but as I know it’s dynamic not static.
Is it what you asked?

The question was simple WHICH ROUTER, has a reachable public IP.
So far, you are batting zero.

The reason I ask is the routers with public IP can be used as the Server for handshake in the wireguard network to be created.
Since you four routers at play, I would advise
Primary (with public IP) and the other three connect to the primary.
If primary goes offline
then one of the other three if one other has a reachable IP becomes the Server for handshake for the remaing two.

Meanwhile while you provide the answers, here is a guide for four routers with two of them being publicly reachable.
http://forum.mikrotik.com/t/wireguard-in-action-experiences-not-theory/174312/18

Can I dm you please?

See my profile

Profile addition removed…

you can check your mailbox