Sharing PPPoe internet connection to a network..?

RouterOS Beginner Basics
1

I need some help with my pppoe connection. I have RB750G.. I want make a pppoe internet connection on routherboard and then share that internet to 30 computers..

In routherboard what steps i need to follow..

Thanks for your help

Özgür

2

Set up the PPPoE client: http://wiki.mikrotik.com/wiki/Manual:Interface/PPPoE#PPPoE_Client - page includes detailed examples
Configure an IP address on the router inside interface: http://wiki.mikrotik.com/wiki/Manual:IP/Address
Configure a DHCP server to hand out inside addresses to the clients: http://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Server
Set up DNS so your router can act as a resolver for your clients: http://wiki.mikrotik.com/wiki/Manual:IP/DNS
Set up NAT out the PPPoE interface so your inside clients can reach the Internet: http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT#Source_NAT

3

Fewi,

Could you please check i did as u said. But it didnt work. I might be mistaken somewhere.
setup.jpg

4

My pppoe connection is connected and dhcp server on ether2 works well, when i connect my computer it takes automatic ip 10.10.0.253.