signal 100% but ????

RouterOS Wireless Networking
1

hi , All

i have Rb 433ah,xr2,

and every thing being OK ,

but I Have a Problem with Airlive access point (400Mwat About 26 DBM )

connected with Xr2 as WDS Repeater.

although Signal being good !!!

signal 22-26 Db .Tx/Rx CCQ 85% -100% P throughput not less Than 5200 kbps

i think that is good

But Her is The Problem

it disconnected Every Minute 3 Or 4 Times .

is there any solution to this Problem .

2

A general rule if you MUST use wds is to ensure you’re using the same brand at either end.
Hardware from different manufacturers isn’t guaranteed to function optimally in a wds mix as far as my experience goes.
I suggest you replace that Airlive unit with a routerboard.