On this page
http://www.mikrotik.com/docs/ros/2.8/root/queue#6.54.7.5
last section explains PCQ
The pic there shows a network setup that is similar to ours except we dont have a hub on the lan side. We are only using the mikrotik router to take the 5.8 trango wireless signal to the whole hotel, about 64 rooms that can use wired or wireless. We have 3 intel ap’s thru out to pass out bandwidth. Total bandwidth they have to use is 2meg.
I want to use simple queue or PCQ? to pass out that 2 meg equally to all but the actuall office personall (they should get 2 meg if needed) and then the customers can get 1 meg shared on all connected.
I am very new to this. Took me a month to get the router up and running. Now cant seem to get the bandwidth shaping figured out.
Any help is most appreciated.
thanks
Cindy
Simple Queue should be most appropriate for that. As shown in the pic all will share the 2meg.
Note: The share may not be equall.
Thank you Onubah.