Simple 802.1Q Trunk and two VLANs - OS 52

RouterOS Beginner Basics
1

Hi

I am a long time Cisco guy and recently got given a RouterBoard 750G buy a guy i’m working with. My set up is simple but i’m finding the Router OS anything but and the documentation seams a little wooly.

I want to use port 1 as a 802.1Q trunk, ports 2-4 in VLAN 340 and port 5 in VLAN 350. VLAN 340 needs a management IP address of 192.168.34.100/24

Can any kind sole provide me with a idiots proof cut and paste on how I get this to work?

Many thanks
J

2

See the second half of my last post in this thread:
http://forum.mikrotik.com/t/native-vlan-and-tagging/36022/1

3

Ok, so it sounds like I need to create a bridge group but not following how I do this in the RouterOS CLI