I have managed to create and configure User Manager associated with HotSPot
within the same router. I have also configured rate limits for the users, but I see
the simple queues created have no parent to the general queue of the HotSpot.
I mean, if user exceeds it’s limits, but the overall queue of the HotSpot is still free,
why can’t it borrow from the above queue?
[admin@RB433] /queue simple> print
Flags: X - disabled, I - invalid, D - dynamic
0 D name=“” target-addresses=192.168.x.xxx/32
dst-address=0.0.0.0/0 interface=all parent=none direction=both
priority=8 queue=default-small/default-small limit-at=64000/64000
max-limit=64000/64000 burst-limit=0/0 burst-threshold=0/0
burst-time=0s/0s total-queue=default-small
1 D name=“hs-” dst-address=0.0.0.0/0 interface=wlan1 parent=none
direction=both priority=8 queue=hotspot-default/hotspot-default
limit-at=0/0 max-limit=0/0 burst-limit=0/0 burst-threshold=0/0
burst-time=0s/0s total-queue=default-small
Is there any way to asign a parent to the simple queue?
Thank you Toni