Simple queue not working in 3.0cr6

RouterOS Wireless Networking
1

I have set up a test ap and client using nstream polling. I have set a queue to limit speed as I normally do in 2.9.x but it shows no traffic flow and does not limit the bandwidth. Is there something different or is there a problem with the queues in 3.0.x

Erik

Transparent Bridge + Mangle + Queue: not working
Queueing Vlan Traffic
2

I has this problem too. Identical setup and i think that is a bug. Tested in 3.0 rc6 only

3

After some more testing It looks like 3.0x is not reporting/displaying properly in Winbox, like it does in 2.9x. After testing is seems the queues are in fact limiting the traffic flow but the winbox display is not reporting the traffic or volume. You may be seeing the same issue.


Erik

4

Hi Erik, no limit here, winbox show nothing, but no limit too.

5

Hi Erik, the solution is: open the winbox, go to bridge, click settings button (right side) and tick “Use IP Firewall”. Solution provided by Fabricio Kammer, user conchalnet, from Brazil. Thanks Fabricio. Valeu Fabrício!!!