My ADSL modem (D-Link DSL-300T) issues a default route with a 32 bit subnet mask. This is marked as invalid by MT and this was discussed at length on the forum here a while back.
Will 2.9 support this routing mode? I’m keen to remove the NAT kludge I’m running on this modem at the moment.
Andrew
Why don’t you replace the modem with a router (like a Dlink DSL502T)? Ask your ISP for 2 fixed IP Addresses. One gets assigned to the Router, and the other is for your single LAN client, i.e. your Mikrotik Router.
I use Eclipse (UK) as an ISP, and can get 2 IP’s instantly from my account on their Website.
I tried the 300T first, and failed. I now use the above setup with 2 DSL502T’s on two 2mbps ADSL lines load balanced.
Steve
Good idea. The 300T is a flawed product & it looks like I can get a reasonable deal on the 502T.
The 300T does work but I have to use two IP addresses on the MT external interface and use the modem’s NAT mode.
Regards
Andrew
I`m using a speedtouch 510 adsl modem, and my MT box is pptp dialing over that for a internet connection.
I live in the netherlands. There are some people playing with Static IP Spoofing (Router gets public ip) but i did not test this setup with mikrotik (yet)
http://www.speedtouch.com/prod510.htm
InDutchOnly http://www.mixfix.nl/helpfiles/alcatel/sipspoof.asp