Slow speed on mirkotik hap ac

RouterOS Wireless Networking
1

Hello

I’ve been having fun with settings, these are current one:

/interface wireless
set [ find default-name=wlan1 ] band=2ghz-g/n basic-rates-a/g=36Mbps,48Mbps,54Mbps basic-rates-b="" country=no_country_set disabled=no distance=indoors frequency=2452 frequency-mode=manual-txpower installation=indoor mode=ap-bridge rate-set=configured ssid=NU_PAGADI \
    supported-rates-a/g=18Mbps,24Mbps,36Mbps,48Mbps,54Mbps supported-rates-b="" tx-power=5 tx-power-mode=all-rates-fixed wireless-protocol=802.11
set [ find default-name=wlan2 ] band=5ghz-n/ac country=no_country_set disabled=no frequency=5300 frequency-mode=manual-txpower installation=indoor mode=ap-bridge ssid=ABAKS_NU_PAGADI tx-power=10 tx-power-mode=all-rates-fixed wireless-protocol=802.11
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=dynamic-keys supplicant-identity=MikroTik

But in wifi 2.4 or 5 i have speed 50-60mbs and upload 120mbs. My speed on cable is 300/150mb. I’ve been trying diffrent freq and i cannot find best one. Im living in a duplex so not that many neighbours around.

Here is data for 2.4
Screenshot from 2020-10-04 20-22-54.png
Screenshot from 2020-10-04 20-23-58.png
Here is data for 5
Screenshot from 2020-10-04 20-24-40.png
Screenshot from 2020-10-04 20-25-38.png

2

Couple of things:

  • Set your TX Power higher, i.e. 2.4G @ 15 and 5G @ 20 (or leave both empty to have maximum TX Power)
  • Set country code
  • Set Basic rate to 12 and supported 12 and up
  • Set installation to Any

Hope this improves

3

Post your client device PHY speed.