What problem can be with configuration if bw test shows that tx/rx throughput is 7Mb/8Mb. pps is 2k/2k
But when normal traffic flow it get maximum tx/rx 2.2Mb/300kb, 300pps/280pps
and latency is raised from 2ms to 500ms
link is configured to operate on 54/54, noise is -96db, signal -60db, CCQ 85/80
any suggestions?
Bandwidth test it again using smaller packets. The bandwidth is probably being gained through full sized packets.
You may need nstreme to consolidate the packets. Regular wifi protocol is not efficient for small packets (such as used by voip and other chatty internet apps.)
Also research why you are only getting 7-8mbit max on a 54 mbit link. With rb433ah’s you could get 30mbit on a 54mbps link.
At evening we have configured WDS. We get 7/7 Mb w/o nstream, but at morning the maximum was 3Mb
This is a simblex link. Count of frames and hw-frames are equeal.
Where to look to find what is problem?
