SNMP single strength on LHG-60 Wireless Wire Dish

RouterOS Wireless Networking
1

Hi

I have a few of the LHG-60 Wireless Wire Dish in PTP and I’m am monitoring the traffic over interfaces and for port errors however it would be really good to also monitor signal strength via snmp can some one confirm the correct OID for this I’ve tried in /interface w60g with print OID but all that shows is below

Flags: X - disabled, R - running
0 R mode=.1.3.6.1.4.1.14988.1.1.1.8.1.2.1 ssid=“.1.3.6.1.4.1.14988.1.1.1.8.1.3.1”
frequency=.1.3.6.1.4.1.14988.1.1.1.8.1.6.1

Kind Regards,
Adrian Goodwin

2

In Dude I use 1.3.6.1.4.1.14988.1.1.1.8.1.12.1 for signal on Wireless Wire Dish

3

Thank you this worked for me

Kind Regards,
Adrian Goodwih