SNMP value for SFP+ port with RJ45 adapter

SwOS
1

Hello,

I have a SwOS switch (CSS610-8G-2S+IN) which reports data to my Observium installation via SNMP.
The SFP+ ports have two connections: one Optic Fiber transceiver and one RJ45 transceiver (also from MikroTik).

In Observium, I can display a lot of data related to the Optic Fiber transceiver port, using „mtxrOpticalTable” MIB, including temperatures.
However, there is no temperature-related SNMP information about the MikroTik RJ45 transceiver port, although it contains a wealth of other SNMP information.
In the web interface, I can see temperatures for both transceivers, meaning the data is reported, but not pushed to SNMP.
Given an RJ45 transceiver module can become pretty toasty (mine currently reads at 80-81 degrees Celsius in the web interface), I would very much appreciate if there was a way to report this specific information via SNMP for monitoring and alerting.

Please let me know if that’s possible or not.

Thank you!

2

Since there is no interest in this, I will replace the switch and buy a competitor brand from now on.
The first MikroTik product I tried will be the last.

3

Not sure what version of SwOS you are using or which RJ45 module but I’m able to see temperature data for my S+RJ10 module. (Empty columns removed for brevity.)


SNMPv2-MIB::sysDescr.0 = STRING: CSS610-8G-2S+ SwOS v2.18

SNMP table: MIKROTIK-MIB::mtxrOpticalTable

 index     mtxrOpticalName mtxrOpticalWavelength mtxrOpticalTemperature mtxrOpticalSupplyVoltage
    9           SFP+1           .00 nm                   78 C                  3.169 V
   10           SFP+2           .00 nm                65408 C                   .000 V