SOHO IPv6 confuzion

RouterOS Beginner Basics
1

OK so. My ISP finally is providing native IPv6. ROS immd caught a prefix. Its bound. I have a pool. Its added dynamic IPv6 DNS servers to my DNS. It looks like the router has aquired its IPv6 address and is happy.

Nothing on my LAN side is getting IPv6 address or anything.

Ive set firewall rules to accept everything. Ive looked thru guides on this on the forum and all that seems to apply to tunnels.

So. As I must not be the only one to have asked this maybe we need a “native IPv6 setup for SOHO cable modems” because that’s where its all going on tunnels are going away ?

Im sorry to be stupid here. i dont know what im doing wrong.

So maybe a basic guide, starting with a factory default setting ROS ?

2

I should also point out that every other SOHO router you buy, even $30 Linksys, works fully with IPv6. Its plug and play. How do I make ROS work like any other SOHO router made today for IPv6 ?

3 
/ipv6 address
add address=::1/64 from-pool=<pool name> interface=<LAN interface> advertise=yes

The address should automatically change to ::1/64 and clients should get correct addresses from the same prefix.