[Solved] WDS mesh

RouterOS Wireless Networking
1

Hi

I have setup in ten mikrotik wds mesh. The problem is that when a device goes under a mikrotik that will have better signal it will not change. Device will have to loose signal to change the mikrotik
Is it possible to fix that?

Thanks in advanced

2

Try this:

/interface wireless access-list
add authentication=no forwarding=no interface=AP signal-range=-120..-80
add interface=AP signal-range=-79..120

Where AP is your wireless interface
When the signal is between -120 to -80 the device will not connected.
When the signal is between -79 to 120 the device will connected.
You can change of course the -80 and -79 to your needs.