Hello - have some trobles with x86 ROS 4.6
in all network interfaces (including ppp inerfaces) I always have ping losses or big delayes. First I thought that it network problems - but not - in the same segment (vlan) I have linux servers - and where are no problems on it interfaces...
My ROS has 4 ethernet interfaces and I use it for pptp and pppoe internet clients
ether1 - WAN for public internet (first channel) - on this interface I have 1000 packets transmitted, 958 received, 4% packet loss, time 1001260ms
ether2 - for RADIUS to aaa users - on this interface I have
1000 packets transmitted, 997 received, 0% packet loss, time 1001289ms
rtt min/avg/max/mdev = 0.575/18.912/902.398/79.355 ms
ether3 - local area - where I have all my ethernet users - on this interface I have 1000 packets transmitted, 988 received, 1% packet loss, time 1000894ms
rtt min/avg/max/mdev = 0.318/15.151/864.809/72.594 ms
ether4 - second public Internet channel (second channel) on this interface I have losses too
so I tested all of them - and has losses on all of them!
Even I ping myself I have losses too
x.x.x.x 64 byte ping: ttl=64 time=2 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x ping timeout
x.x.x.x 64 byte ping: ttl=64 time=2 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x ping timeout
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x ping timeout
x.x.x.x 64 byte ping: ttl=64 time=1 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x 64 byte ping: ttl=64 time=1 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
x.x.x.x 64 byte ping: ttl=64 time<1 ms
1000 packets transmitted, 973 packets received, 2% packet loss
round-trip min/avg/max = 0/11.8/875 ms
I PING MYSELF (ROS and have losses)
but most I have more losses on ppp interfaces
366 packets transmitted, 346 received, 20 losses
(5% losses)
min = 0ms, max = 729 ms, average = 8 ms
Control-C
before it I had installed accorp network card - and ROS - didnt want to work good with em! I had tx ant rx drops
then I installed dlink netcard - and there were no tx ant rx drops !!!!
and now I have no tx ant rx drops - but have losses too
where is no 100% cpu usage...
I am tired of it - please help...
what can you advise to me?
I had sent supout to support