hi
i have some problem with my routers example.:
192.168.3.200 ->switch ->192.168.3.150 → wlan link and routing is set(rip) -->192.168.9.150
and now i cant ping or connect to 192.168.3.200 but all clients that are connected to 3.200 can download/upload…to 9.150
and 9.150 >3.150 is work ok download/upload/ping
what should i do??
can i set on 3.200 some getway to 9.250 or what??
tnx
by
Post the route tables from the routers. Also, one of the clients that has the problem.
Regards
Andrew
ok i solved the problem…
the problem whas that on 3.200 i havent set the bridge into rip and so i havent got any routes from the other network’s..
i have try this the first time and it don’t work…the routs don’t want do update…
but today i have try and finnaly it work’t …why? i don’t now but it’s working now…
tnx
by
Please Could U Xplain more
I have multiple IPs from my ISP and and I want to pass them through MT and do the Traffic Shapping as well as have my MT as the DNS Server
What I am saying is
ISP Modem ------>MT-----> Clients with Public IPs from ISP
Maybe I dont really get RIP and Bridging 
i’m some kind a noob and i don’t now how to set it with the line’s but trough winbox
just set ever card to rip and that’s all…
Please marek001 may be I did not explain my self very well
What I have is a Modem from My ISP with alot of Public IP right. Now I want to pass all this Public IP through the MT. I connect to Modem with Eth0 (Let say IP= 217.194.213.x/255.255.255.224) and LAN (Let Say IP=172.16.1.x/255.255.255.254) is on Eth1.
I dont want to do NAT. I just want to RIP so that my LAN will be able to browse the internet and at the same time I will be able to Use same Eth1 to Pass IP’s 217.194.213.x Out so that Some other PC’s can connect with that via the MT. This is for me to be able use the MT as the DNS for other Clients.
And to say I will appreciate if you can Just explain how to do that via the WinBox?