somw help im trying to setup a network with three ether's

RouterOS General
1

hey

here what i am trying to do and did

in the past weeks i had 2 ethers

first i get internet with (by pppoe client)
second i transmit the intenet with (hotspot and pppoe server)

all shits was going well until i got another stronger internet

so i conected it to them

and i became ether3

and i conect to the internet with pppoe client through it

but only the ether1 internet is transmited and the ether3 is not

can you help me out?


ether1 (i get inter net with it and conect to it with pppoe client)
ether2 (i transmit the inter net with (its the AP) )
ether3 (i get internet with it and conect to it with pppoe client)

some help what should i do to merge the speed of ether1 and ether3


???

thanks

2

Different providers or one provider that doesn’t offer MLPPP:
http://wiki.mikrotik.com/wiki/Manual:PCC
http://wiki.mikrotik.com/wiki/How_PCC_works_(beginner)

Same provider that offers MLPPP:
http://wiki.mikrotik.com/wiki/Manual:MLPPP_over_single_and_multiple_links#Configuration__Example

No one here can tell you whether your provider offers MLPPP, call them to find out. If you have two different providers then you need to use the PCC option.

You can also search the forums for threads about MLPPP and PCC. This is a very, very frequently asked question.

3

thanks the onw who help newbis around

thanks that was what im looking for

and they are difrent providers

thanks