Hi,
Iv just started monitoring my test network at home. I was picking up my Sonos speakers, and decided to try and show them correctly. I defined a service on Port 1400, and a Device (the service on Port 1400 plus Ping) and now I can identify the Sonos speakers automatically. They dont support SNMP through as far as I can see. They do have a status page though - So If I go to a speaker and look at
http://192.168.10.89:1400/status/zp
I get the following back
ZoneName Office
ZoneIcon x-rincon-roomicon:office
Configuration 1
LocalUID RINCON_B8E937D3778E01400
SerialNumber B8-E9-37-D3-77-8E:0
SoftwareVersion 35.3-38281
SoftwareDate 2017-02-28 19:33:08.611906
SoftwareScm 303946
MinCompatibleVersion 34.0-00000
LegacyCompatibleVersion 25.0-00000
HardwareVersion 1.8.1.3-2
DspVersion 0.25.3
HwFlags 0x14
HwFeatures 0x60
Variant 1
GeneralFlags 0x0
IPAddress 192.168.10.89
MACAddress B8:E9:37:D3:77:8E
Copyright © 2003-2017, Sonos, Inc. All rights reserved.
ExtraInfo OTP:
HTAudioInCode 0
IdxTrk
MDP2Ver 4
MDP3Ver 0
RegState 3
CustomerID 115645366
So is there some way I can pick out the value of the “ZoneName” field (Office in this case) and display that on the graph? Where do I look please ?
Many thanks
ian