Spectrum analyzer atheros 9223 ! mikrotik

Hi there,

i’ve just installed 4.3, thank you mikrotik for hard word!

In twitter about 2/3 days ago i’ve read about a new software feature of RouterOS, the Spectrum Analyzer.

Also i’ve read that work only with:

Currently this feature is supported only for Atheros Merlin chips. AR9220, AR9280, AR9223.

Now… i’ve put a Atheros AR9223 of Compex in one of my RouterOS routers. And:

[toor@caronte] > interface wireless spectral-scan wlan1
failure: this device can not do spectral scan
[toor@caronte] >

This my system information:

[toor@caronte] /interface wireless> /system resource pr   
                   uptime: 13m36s
                  version: "4.3"
              free-memory: 13804kB
             total-memory: 29964kB
                      cpu: "MIPS 4Kc V0.10"
                cpu-count: 1
            cpu-frequency: 399MHz
                 cpu-load: 16
           free-hdd-space: 89972kB
          total-hdd-space: 126976kB
  write-sect-since-reboot: 116
         write-sect-total: 135350
               bad-blocks: 5
        architecture-name: "mipsle"
               board-name: "RB532"
[toor@caronte] /interface wireless>

PS: Card perfectly run in 802.11n mode with great coverage and performance.

Best Regards,

RG.

I just tested our R2N wireless card that uses the same chipset, and it works. apparently your chipset is some other modification that is not Merlin. It’s hard to say which ones support this feature, but i’m certain that RouterBOARD R2N and R52N cards work.

Yes i can confirm that mk cards work perfectly. Thank you for reply.

Regards.

failure: this device can not do spectral scan

But we want support for all Atheros cards. Or all Atheros N cards at least.
It’s already bad enough that RouterOS does not have support of other Wi-Fi chipset except some ancient ones.

Don’t Atheros supply ready made drivers for this?

Because 11n links DO NEED SPECTRUM ANALYSIS !! to be set up.

rant rant rant

this is a feature only available in certain new atheros chips. it’s not a software or driver issue.

is it supported on the RB711 platform??

any update?

need to know if it works on the RB711 5 platform??

sprectral scan is working on RB711-5HnD