Speed Limit per connection over EoIP Tunnel

RouterOS General
1

Hi guys,

I have made a EoIP Tunnel for a costumer with speed limit of 20Mbps (I own a WISP and the tunnel is through my network).

The strange thing is that each conenction (for example FTP or a backup program he uses) does not get over 3 or 4 Mbps per connection. Running several parallel connections reaches 20Mbps (but each does not get over 4 Mbps).

I am not sure what the problem is. MTU is ok (1472 - windows servers), wired connections are ok (100Mbps full), I don’t know what else to check.

Have you ever seen this? Any idea what the problem could be?

Thanks

PS- The configuration is:

  • My network is connected to eth1.
  • eth2 is bridged with EoIP, so it is a transparent VPN (layer 2) for the costumer
2

are you running any simple queues or queue trees.

3

No, only some firewall rules, but removing them makes no difference…

Any idea?

4

Do you think changing from EoIP to MPLS (or other type of VPN) would make a difference?

I mean, it shouldn’t, but I have no idea what is going on…

5

I had this same problem recently. I was running IP Sec over my eoip tunnel and removing that seemed to fix it.