Spliiting Local IX and International Traffic

RouterOS General
1

Hello

Iam new to Mikrotik. Can anyone tell me how I can split internet traffic bound for the local internet exchange vs those bound for the International pipe ?
We have 50+ Workstations in the office all using private IP and we need to place a more stringent limit on the international bound traffic. Should I be using BGP or OSP ? Can anyone show me a simple network topology on which I can achieve this ?
Thank you for replying beforehand.

2

Check the how to

http://www.mikrotik.com/docs/ros/2.8/howto/howto.content

Regards

Maximiliano
Mikrotik Certified Consultant
Intercity SRL
Rio Cuarto-Argentina

3

Thank you for the reply.

I have read the how-to. I have a similar idea before i created the thread. However, there are some problems :

  1. The routes are static, if some local ISP get a new block of IP address, i have to add a new routing policy.
  2. Iam unable to get the list of ip addresses for my local ISP. Is there a website or tools on the internet which will allow me to obtain all the ip address for a country ?
  3. Even if were able to get the list of IP for my country, wont the routing table get too large and slows down the router ?


    thank you
4

unless your using bgp, you cannot split routes dynamically

5

Use static routing… but.. you have to do it manually… let’s say you have 1000 routing to local ix exchange.. have to add 1 by 1 manually.