squid+mikrotik

RouterOS General
1

hello there freinds
i have mikrotik V3.30 , and i made squid proxy server , squid Ver 2,7 on ubuntu OS 9.04 , everything is working fine and all the browser requests are saving , but the problem is the ZPH is not working , coz i download file .rar or any other extension and i wait for 1 m , once i download again its use the bandwidth limit ,i dont know what’s the problem , so any one can help plz.


and this’s the ZPH conf

tcp_outgoing_tos 0x30 localnetwork
zph_mode tos
zph_local 0x30
zph_parent 0

and in mikrotik …
chain=forward action=mark-packet new-packet-mark=cache passthrough=yes
dscp=12
queue sim/
name=“cachehit” dst-address=0.0.0.0/0 interface=End-Users parent=none
packet-marks=cache direction=both priority=8
queue=default-small/default-small limit-at=0/0 max-limit=5M/5M
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small

2

it normal to see it on queue name=“cachehit”
but if you see it on client queue that not normal and should not happen

where you do monitor???

3

i know its normal to see it on cachehit , but must be faster when download again , its use the same its limit , without to pass by ZPH

4

Upgrade to 4.11. Buy a license first, as 2.9.27 is virtually guaranteed to be pirated and doesn’t warrant support.

5

who told u my Ver 3.30 its not lisened , i have more than 35 server and routerboard and all licened

6

I have no idea why I thought your original post referenced 2.9.27 just because you mentioned Squid 2.7. My bad.

Is the mangle rule getting any hits at all? Is it possible that later rules assign a different packet mark seeing how you have passthrough set to ‘yes’?

7

5m speed youd have for download for cache ???