I would like to continue to use brass standoffs with my Rb532a’s, is there any place that I can find out what MikroTik recommends for standoffs so that I get enough clearance. Specs, Part #, where I can get?
I would like to know this as well. We have resorted to bending small bits of metal strapping (aka Plumber’s Tape) because we found the clearance to be almost perfect. If there was a recommended place to get standoffs we’d much rather use those instead.
Has anyone know what MikroTik recommends for standoffs for 133c and or 532a boards, Height, vender?
Tasos with Titanwirelessonline.com has told me he has the larger standoffs (hardware in general too) like what you desire.
Shoot him an email if you don’t see it on the website.
Scott
Thank you very much CarulloS
This will help me greatly!!
Hi. We buy Eagle Plastic Devices part number 561-187TAB from Mouser electronics: https://www.mouser.com/catalog/633/1750.PDF If you buy qty, you can get it for about 1/4 the advertised price from elsewhere, plus NO drilling.
Plus NO grounding 