Hi all,
I’m with problems to configure my first hotspot.
Today I’ve the follow structure on my APs:
RB333
2 R52H configurated as APs
Bridge1 with the 2 R52H cards on the ports
IP address 201.201.201.1 set on the bridge
IP address 191.168.0.2 set on the ether1
The default gateway is 192.168.0.1
I’ve MAC Authentication activated on the Wirless Profile with the Radius option
I’ve the Radius client working fine.
All the wireless clients have fixed IP address and valid IP address for the Internet, than I don’t want to do masquerade or nat of the clients traffic, I want that the traffic each client goes to the Internet with the original IP address.
This configuration is working very well but now I want to start to use the hotspot, just for the mikrotik router os creates the simple queues of the clients dynamically (can I do this using the mac authentication of the wireless? I don’t believe)
My question is: How can I do this without generate any problem to my customers?
Please I need of detailed instructions because I don’t know anything about hotspot.
PS: I need that the Hotspot use the MAC authentication based on a FreeRadius server.
Regards
Fabrício