Hello,
I have a problem with MT p2mp.
Every time when station do ‘background scan’ ping (ip/mac) is on inacceptable level (>300)
It happen on omnitik ac, sxt-sa, 921 as AP and sq-ac, sxt-lite as APC (tested by my company)
No matter: ‘wireless-protocol’, noise floor level, frequency, ros/rb firmaware version (>6.4x.x), ‘wireless-mode’ on CPE (station, wds-slave, station-pseudobridge), number of CPE on ap, interface utilization.
How to disable this function?
I think its a bug.
16:55:18 wireless,debug wlan1: start background scan
16:56:01 wireless,debug wlan1: background scan complete, must select netw
16:56:01 wireless,debug wlan1: did not find better AP
–
310 C4:AD:34:xx:xx:xx 70 7ms
311 C4:AD:34:xx:xx:xx 70 2ms
311 C4:AD:34:xx:xx:xx 70 2ms
312 C4:AD:34:xx:xx:xx 70 1ms
312 C4:AD:34:xx:xx:xx 70 3ms
313 C4:AD:34:xx:xx:xx 70 1ms
313 C4:AD:34:xx:xx:xx 70 1ms
314 C4:AD:34:xx:xx:xx 70 1ms
314 C4:AD:34:xx:xx:xx 70 4ms
315 C4:AD:34:xx:xx:xx 70 1ms
315 C4:AD:34:xx:xx:xx 70 1ms
316 C4:AD:34:xx:xx:xx 70 417ms
316 C4:AD:34:xx:xx:xx 70 417ms
317 C4:AD:34:xx:xx:xx 70 0ms
317 C4:AD:34:xx:xx:xx 70 1ms
318 C4:AD:34:xx:xx:xx 70 35ms
318 C4:AD:34:xx:xx:xx 70 36ms
319 C4:AD:34:xx:xx:xx 70 114ms
319 C4:AD:34:xx:xx:xx 70 114ms
sent=320 received=640 packet-loss=-100% min-rtt=0ms avg-rtt=3ms
max-rtt=417ms
SEQ HOST SIZE TTL TIME STATUS
320 C4:AD:34:xx:xx:xx 70 193ms
320 C4:AD:34:xx:xx:xx 70 193ms
321 C4:AD:34:xx:xx:xx 70 273ms
321 C4:AD:34:xx:xx:xx 70 274ms
322 C4:AD:34:xx:xx:xx 70 353ms
322 C4:AD:34:xx:xx:xx 70 354ms
323 C4:AD:34:xx:xx:xx 70 433ms
323 C4:AD:34:xx:xx:xx 70 434ms
324 C4:AD:34:xx:xx:xx 70 1ms
324 C4:AD:34:xx:xx:xx 70 1ms
325 C4:AD:34:xx:xx:xx 70 56ms
325 C4:AD:34:xx:xx:xx 70 57ms
326 C4:AD:34:xx:xx:xx 70 133ms
326 C4:AD:34:xx:xx:xx 70 133ms