Station Pseudo Bridge and NAT problem

RouterOS Wireless Networking
1

Hi all I’m having some problems with my configuration.
Elements:

  1. Router Motorola Sbg900 connected to Internet
  2. Rb133 with 2 wifi cards.


    1-I’ve conected wlan1 with sbg900 as a station pseudobrige and dhcp client.
    2-I’ve set wlan2 as apbridge
    3-I’ve added Bridge1 with wlan1 and wlan2
    4-I’ve added new NAT rule: chain:srcnat , out.interface:wlan1 ,Action:Masquerade

I`m connected with my laptop (ip 192.168.1.20) over wifi to wlan2 and I can’t reach Internet but I can access the Motorola sbg900 (192.168.0.1). If i want to access to Internet i have to set my laptop Ip with the same Ip address of wlan1! (for exmaple 192.168.0.13, the dhcp Ip assigned from sbg900 to wlan1)

What I need to do?

Regards

2

Not sure about the full configuration of your network. Try taking NAT off of the MT. The Motorola is probably doing the NAT.

3

Greetings!

Why are wlan1 and wlan2 bridged? Try removing that bridge and assign a different IP/subnet and dhcp server to wlan2.

Also insure under
/ip route
there is a gateway=192.168.0.1