Hello, I have a network with a 3011UiAS router and multiple wireless devices (SXT and Ubi mixed). When I checked the stp on my bridge, I saw something strange: the root-bridge-id doesn’t have the mac address.
monitor bridge
state: enabled
current-mac-address: E4:8D:8C:78:C4:B9
root-bridge: yes
root-bridge-id: 0x1000.00:00:00:00:00:00
root-path-cost: 0
root-port: none
port-count: 10
designated-port-count: 7
fast-forward: no
Moreover, two ports are not transmitting data, unless I disable stp…
This is the result of the non-transmitting port. In winbox, on the status page, the learning is blinking on/off irregularly.
interface: 07 Ny-AP
status: in-bridge
port-number: 10
role: designated-port
edge-port: no
edge-port-discovery: yes
point-to-point-port: yes
external-fdb: no
sending-rstp: yes
learning: no
forwarding: no
hw-offload-group: switch2
What could cause this issue? Thanks