Hi all,
We are using various models, of Routerboards, on our network and have a scripting system in place that exports the configuration to a central server for backup.
On the ROS version 5.x units everything works just fine.
However on some of our ROS 6.0 units the export function does not work correctly.
We are using “/export verbose hide-sensitive file=serial_number.rsc” to create the file.
On some of the boards not all of the wireless sets are been exported. It looks like only set “0” gets exported.
When I run “/interface wireless export verbose” in a terminal window, for testing, only set “0” shows.
But when I run “/interface wireless export compact” then all the sets are shown.
I know the difference between “verbose” and"compact" and for what we do we need the “verbose” option.
So far it does not matter if the board has the latest firmware or not.
And it looks like only on the RB433 boards, is where this is happening.
I have not been able to replicate this behaviour.
Any help would be appreciated.
Many thx in adv.
/Neji