strange graphs

RouterOS General
1

i have noticed that on one of my rb112 units interface graphs look strange
see your self

http://www.from.okay.pl/sioux/stats.htm

[xxx@4_sektor_2] > /tool graphing interface print
Flags: X - disabled

INTERFACE ALLOW-ADDRESS STORE-ON-DISK

0 sektor_2 0.0.0.0/0 yes

[xxx@4_sektor_2] > /int print
Flags: X - disabled, D - dynamic, R - running

NAME TYPE RX-RATE TX-RATE MTU

0 R ether1 ether 0 0 1500
1 X sektor_1 wlan 0 0 1500
2 R sektor_2 wlan 0 0 1500
3 R bridge1 bridge 0 0 1500

[xxx@4_sektor_2] > /int bridge port print
Flags: X - disabled, I - inactive, D - dynamic

INTERFACE BRIDGE PRIORITY PATH-COST

0 ether1 bridge1 128 10
1 sektor_2 bridge1 128 10

this unit is running v2.9.30 .. rest of my units runs 2.9.28 and 2.9.29

what is cousing that graphs looks like that - only "Daily" Graph (5 Minute Average) ?

2

what exactly is strange about it?

3

two blue lines at “Daily” Graph (5 Minute Average)

on every other unit there is only one

4

oh …

5

sooo. this is not a BUG right ?

6

I would say that it is an issue with your cacti config.

7

it’s not cacti.

so, looks like the clock got turned back at some point, and there was another graph at the same time. what does it look like now?

8

So it isn’t…oops :blush:

9

now every thing is ok. after next reboot it starts drawing normaly.