Strange ping behavior

Hello

I've found very strange ping behavior on my RB2011:
[admin@RB20111] /tool sniffer packet> /ping 192.168.1.30
HOST SIZE TTL TIME STATUS
192.168.1.30 timeout
192.168.1.30 timeout
sent=2 received=0 packet-loss=100%

[admin@RB20111] /tool sniffer packet> print

TIME INTERFACE SRC-ADDRESS

0 11.995 mainVRRP 192.168.1.250
1 11.995 vlanGeneral 192.168.1.250
2 11.995 LocalAggLink 129.0.4.177
3 11.995 ether9 129.0.4.177
4 12.998 mainVRRP 192.168.1.250
5 12.998 vlanGeneral 192.168.1.250
6 12.998 LocalAggLink 129.0.4.177
7 12.999 ether9 129.0.4.177What's the 129.0.4.177 address is? There isn't such addresses in my network.
[admin@RB20111] /tool sniffer packet> /ip address print
Flags: X - disabled, I - invalid, D - dynamic

ADDRESS NETWORK INTERFACE

0 192.168.89.250/24 192.168.89.0 ether5
1 X 172.23.77.250/24 172.23.77.0 LocalAggLink
2 192.168.88.250/24 192.168.88.0 vlanOB
3 192.168.2.250/24 192.168.2.0 ether6
4 10.255.255.250/32 10.255.255.250 loopbackOB
5 192.168.192.250/24 192.168.192.0 LocalAggLink
6 192.168.1.250/24 192.168.1.0 vlanGeneral
7 192.168.1.245/24 192.168.1.0 mainVRRP
8 192.168.106.250/24 192.168.106.0 vlanDirectoral
9 192.168.106.245/24 192.168.106.0 vrrpDirectoral
10 192.168.177.250/24 192.168.177.0 vlanVoIP
11 192.168.177.241/24 192.168.177.0 vrrpVoIP
12 192.168.192.245/24 192.168.192.0 vrrpGuest

And one more thing: with 6.6 firmware there is no ping. BUT! with 6.4 ping pass with the same 129.0.4.177 address visible in sniffer.

I have just found something similar in ROS6.4mips while testing vlan’s on the switch chips & QinQ.

Capture MT.PNG