Super Channel / DFS No Radar / No Country Set wont run on selected channel

RouterOS General
1

Hello

I have a RB912 5UAG-5HPND I have set to Super Channel … set Country to No Country Set and DFS set to No Radar Detect. The Channel is set to 5395 but the receiving RB 911 shows the channel as 5220.

Why is this doing that? Why can I not set the Channel I want? Why pretend to let me set the channel and then set it to what ever it wants?

2

Which one is the AP? station follows AP.

3

HI

The 912 is the AP the 911 the Station

the 912 is set to 5395

But the 911 Station in the Status screen says it is running on 5220 not 5395

I scanned with another 911 and it confirms the 912 is broadcasting on 5220 not 5395 like it is set to

4

What happens if you remove 5395 from the scan-list?

5

So I have done so more reading I guess my first question is does the RB912AUG-5HPnD even support extra channels. The mikrotik manual says this

Currently only Atheros AR92xx based chips support non-standard center frequencies and widths with the following ranges:
center frequency range: 2200MHz-2500MHz with step 0.5MHz (500KHz), width range: 2.5MHz-30MHz width step 0.5MHz (500KHz);
center frequency range: 4800MHz-6100MHz with step 0.5MHz (500KHz), width range: 2.5MHz-30MHz width step 0.5MHz (500KHz);

AR93xx doesn’t support this feature

So perhaps a Mikrotik Expert could please weigh in here because the Mikrotik RB912AUG-5HPnD Data sheet says

http://i.mt.lv/routerboard/files/RB912-150924141406.pdf

Frequency range is 4900-5920

So does the RB912AUG-5HPnD support extra channels or not???