Switch Chip VLAN Switching in Software Bridge

[PackElend]

The way #1 is only possible with vlan-filtering enabled on bridge. The way #2 is also possible if bridge doesn’t do anything about vlans which was up to ROS version 6.40 or there about.

The way #1 is the contemporary way of doing it, wifiwave2 drivers don’t support tagging any more so I guess with time #2 will be gone.

is that resolved by

RouterOS version 7.3beta33 has been released “v7 testing” channel!
What’s new in 7.3beta33 (2022-Apr-11 14:09):
…
*) ww2 - fixed VLAN tag handling;

?


I’m done with my configuration but I noticed that:

1. that hEX S only forwards traffic on the hardware, if all VLANs have access to the bridge port, see my comment in http://forum.mikrotik.com/t/hex-s-and-hardware-vlan-switching/152409/10
2. my phone suddenly does not tx/rx data anymore and is disconnected from WiFi although not being moved.It reconnects (still not being moved) and tx/rx dat again. It could be that it changes SSID.
   I’m still investigating but no clue why this is happening Wondering if that is related to the here discussed configuration.
   I got this from the log, phone not moved:

21:42:44 echo: caps,debug 4E:10:A0:6A:CA:FD@AP_1F-W_MT-cAP-ac-1 connected, signal strength -63
21:42:44 echo: caps,debug 4E:10:A0:6A:CA:FD@AP_1F-W_MT-cAP-ac-1-1 disconnected, registered to other interface, signal strength -65
21:43:17 echo: caps,debug 4E:10:A0:6A:CA:FD@AP_1F-W_MT-cAP-ac-1 disconnected, received deauth: sending station leaving (3), signal strength -60
21:43:18 echo: caps,debug 4E:10:A0:6A:CA:FD@AP_1F-W_MT-cAP-ac-1-1 connected, signal strength -59