SXT ac - Current TX Power display don't work ?

Marta · August 14, 2014, 7:15am

On SXT ac (ROS 6.18) current TX power display value is all the time 0dBm. Is this due chip change (Atheros->Qualcomm) or different problem?

rextended · August 14, 2014, 10:17am

you must activate first the wlan

fposavec · August 14, 2014, 10:22am

I have active link with only AC, but txpower is always 0.

ste · August 14, 2014, 10:55am

Sent a supout.rif last week. Should be a known bug.

captainproton · September 7, 2014, 10:15am

I see the same here.
Also the signal on a 3,5 km link is very bad. So I asume that really no tx power is being used.
I have tried all settings that I found. No change.

chalan · January 18, 2016, 9:18am

any udate about that? RB911G-5HPacD and RB922UAGS-5HPacD the same problem with current tx power…

noib · January 18, 2016, 10:16am

I think it’s related to all “ac” chipsets. I have miniPCI cards R11e-5HacD with same situation, there is nothing in the “Current Tx Power” tab.

kmok1 · March 31, 2016, 2:40pm

This is still happening with RB911G-5HPacD and RB922UAGS-5HPacD under ROS 6.34.4 w/ firmware 3.31.

kiaunel · March 31, 2016, 8:06pm

Same situation with RouterBOARD 952Ui-5ac2nD

Sent from my Lenovo K50a40 using Tapatalk